![]() ![]() If you have a winbond flash just do the same steps except go to option 3.3 "winbond flash" then choose the Bios you want i recommend iND.BIOS or Evox F and G now press a and go all the way to the left to "advanced" and then open "flash menu" and now "HDD Flash" and now just press A on "bios.bin" and the software will flash your bios.Īnd now your XBOX should be booting right into your dashboard you have chosen.įirst burn the Chimp 2618 and then open your XBOX and connect the Molex Y-Splitter like in the picture and set the new hdd to Slave Now put your XBOX back together and put the burned HeXEn boot cd into your dvd drive of the XBOX and then scroll down to the third option (TSOP Flashed / Chipped XBOX tools) and if your console is fitted with everything BUT a winbond choose option 3.2 now just choose "Flash 256K BIOS, 1.0-1.5" and now choose the BIOS you want i recommend iND.BIOS 5004 or Evox F and G then press A on your selected bios and then Y and now your XBOX should be flashing the BIOS once it's complete the XBOX will shutdown. Now open your XBOX (picture down below) and take out the HDD caddy and the dvd drive (picture also down below).Now you see the the points you are going to bridge and if you have a V1.0/1.1 Revision you have to take out the Motherboard of the XBOX.Then take your soldering iron and bridge these points with some solder.(picture down below). So with the small explanation behind me now, let me continue about the XBOX bios, there are different chips used for the XBOX in it's manufacturing time, SHARP/ST/Winbond/Hynix/Fujitsu, there may be more but these are the ones that are most common. What is a TSOP? a TSOP is basically a chip that contains the bios to the XBOX, a bios is basically the chip that tells your machine what to do upon startup. Firstly only XBOX's version 1.0 to 1.5 can have their TSOP flashed. ![]()
0 Comments
Leave a Reply. |